# You need to replace these
hcloud_token = "xxxxxxxxxxxxxxxxxxYYYYYYYYYYYYYYYYYYYzzzzzzzzzzzzzzzzzzzzz"
public_key   = "/home/username/.ssh/id_ed25519.pub"
# Must be "private_key = null" when you want to use ssh-agent, for a Yubikey like device auth or an SSH key-pair with passphrase
private_key  = "/home/username/.ssh/id_ed25519"

# These can be customized, or left with the default values
# For Hetzner locations see https://docs.hetzner.com/general/others/data-centers-and-connection/
# For Hetzner server types see https://www.hetzner.com/cloud
location         = "fsn1"       # change to `ash` for us-east Ashburn, Virginia location
network_region   = "eu-central" # change to `us-east` if location is ash

# It's best to leave the network range as is, unless you know what you are doing. The default is "10.0.0.0/8".
# network_ipv4_range = "10.0.0.0/8"

# You can have up to as many subnets as you want (preferably if the form of 10.X.0.0/16),
# their primary use is to logically separate the nodes.
# The control_plane network is mandatory.
network_ipv4_subnets = {
  control_plane = "10.1.0.0/16"
  agent_big     = "10.2.0.0/16"
  agent_small   = "10.3.0.0/16"
}

# At least 3 server nodes is recommended for HA, otherwise you need to turn off automatic upgrade (see ReadMe).
# As per rancher docs, it must be always an odd number, never even! See https://rancher.com/docs/k3s/latest/en/installation/ha-embedded/
# For instance, 1 is ok (non-HA), 2 not ok, 3 is ok (becomes HA).
control_plane_count       = 3

# The type of control plane nodes, see https://www.hetzner.com/cloud, the minimum instance supported is cpx11 (just a few cents more than cx11)
control_plane_server_type = "cpx11"

# As for the agent nodepools, below is just an example, if you do not want nodepools, just use one,
# and change the name to what you want, it need not be "agent-big" or "agent-small", also give them the subnet prefer.
agent_nodepools = {
  agent-big = {
    server_type = "cpx21",
    count       = 1,
    subnet      = "agent_big",
  }
  agent-small = {
    server_type = "cpx11",
    count       = 2,
    subnet      = "agent_small",
  }
}

# That will depend on how much load you want it to handle, see https://www.hetzner.com/cloud/load-balancer
load_balancer_type        = "lb11"

# If you want to use a specific Hetzner CCM and CSI version, set them below, otherwise leave as is for the latest versions
# hetzner_ccm_version = ""
# hetzner_csi_version = ""

# If you want to use letsencrypt with tls Challenge, the email address is used to send you certificates expiration notices
# traefik_acme_tls = true
# traefik_acme_email = "mail@example.com"

# If you want to allow non-control-plane workloads to run on the control-plane nodes set "true" below. The default is "false".
# allow_scheduling_on_control_plane = true

# If you want to disable automatic upgrade of k3s, you can set this to false, default is "true".
# automatically_upgrade_k3s = false

# Allows you to specify either stable, latest, or testing (defaults to stable), see https://rancher.com/docs/k3s/latest/en/upgrades/basic/
# initial_k3s_channel = "latest"

# Adding extra firewall rules, like opening a port
# In this example with allow port TCP 5432 for a Postgres service we will open via a nodeport
# More info on the format here https://registry.terraform.io/providers/hetznercloud/hcloud/latest/docs/resources/firewall
# extra_firewall_rules = [
#   {
#     direction = "in"
#     protocol  = "tcp"
#     port      = "5432"
#     source_ips = [
#       "0.0.0.0/0"
#     ]
#   },
# ]

# If you want to configure additional Arguments for traefik, enter them here as a list and in the form of traefik CLI arguments; see https://doc.traefik.io/traefik/reference/static-configuration/cli/
# Example: traefik_additionalOptions = ["--log.level=DEBUG", "--tracing=true"]
# traefik_additionalOptions = []