diff --git a/README.md b/README.md
index f1b7f89..ea9a84c 100644
--- a/README.md
+++ b/README.md
@@ -37,7 +37,7 @@ _Please note that we are not affiliated to Hetzner, this is just an open source
 - Proper use of the Hetzner private network to minimize latency and remove the need for encryption.
 - Automatic HA with the default setting of three control-plane nodes and two agent nodes.
 - Super-HA: Nodepools for both control-plane and agent nodes can be in different locations.
-- Possibility to have a single node cluster with a proper ingress controller (Traefik).
+- Possibility to have a single node cluster with a proper ingress controller.
 - Ability to add nodes and nodepools when the cluster running.
 - Traefik ingress controller attached to a Hetzner load balancer with proxy protocol turned on.
 - Tons of flexible configuration options to suits all needs.
diff --git a/agents.tf b/agents.tf
index 4ce992d..fec9eb8 100644
--- a/agents.tf
+++ b/agents.tf
@@ -1,7 +1,7 @@
 module "agents" {
   source = "./modules/host"
 
-  for_each = local.agent_nodepools
+  for_each = local.agent_nodes
 
   name                   = "${var.use_cluster_name_in_node_name ? "${var.cluster_name}-" : ""}${each.value.nodepool_name}"
   ssh_keys               = [hcloud_ssh_key.k3s.id]
@@ -27,7 +27,7 @@ module "agents" {
 }
 
 resource "null_resource" "agents" {
-  for_each = local.agent_nodepools
+  for_each = local.agent_nodes
 
   triggers = {
     agent_id = module.agents[each.key].id
diff --git a/control_planes.tf b/control_planes.tf
index 3699b31..1ca97f2 100644
--- a/control_planes.tf
+++ b/control_planes.tf
@@ -1,7 +1,7 @@
 module "control_planes" {
   source = "./modules/host"
 
-  for_each = local.control_plane_nodepools
+  for_each = local.control_plane_nodes
 
   name                   = "${var.use_cluster_name_in_node_name ? "${var.cluster_name}-" : ""}${each.value.nodepool_name}"
   ssh_keys               = [hcloud_ssh_key.k3s.id]
@@ -29,7 +29,7 @@ module "control_planes" {
 }
 
 resource "null_resource" "control_planes" {
-  for_each = local.control_plane_nodepools
+  for_each = local.control_plane_nodes
 
   triggers = {
     control_plane_id = module.control_planes[each.key].id
diff --git a/init.tf b/init.tf
index 80537b4..dd72fbb 100644
--- a/init.tf
+++ b/init.tf
@@ -19,8 +19,8 @@ resource "null_resource" "first_control_plane" {
       kube-controller-manager-arg = "flex-volume-plugin-dir=/var/lib/kubelet/volumeplugins"
       node-ip                     = module.control_planes[keys(module.control_planes)[0]].private_ipv4_address
       advertise-address           = module.control_planes[keys(module.control_planes)[0]].private_ipv4_address
-      node-taint                  = local.control_plane_nodepools[keys(module.control_planes)[0]].taints
-      node-label                  = local.control_plane_nodepools[keys(module.control_planes)[0]].labels
+      node-taint                  = local.control_plane_nodes[keys(module.control_planes)[0]].taints
+      node-label                  = local.control_plane_nodes[keys(module.control_planes)[0]].labels
       disable-network-policy      = var.cni_plugin == "calico" ? true : var.disable_network_policy
       },
       var.cni_plugin == "calico" ? {
diff --git a/locals.tf b/locals.tf
index c71cd25..cbe56e8 100644
--- a/locals.tf
+++ b/locals.tf
@@ -172,7 +172,7 @@ locals {
   install_k3s_server = concat(local.common_commands_install_k3s, ["curl -sfL https://get.k3s.io | INSTALL_K3S_SKIP_START=true INSTALL_K3S_SKIP_SELINUX_RPM=true INSTALL_K3S_CHANNEL=${var.initial_k3s_channel} INSTALL_K3S_EXEC=server sh -"], local.apply_k3s_selinux)
   install_k3s_agent  = concat(local.common_commands_install_k3s, ["curl -sfL https://get.k3s.io | INSTALL_K3S_SKIP_START=true INSTALL_K3S_SKIP_SELINUX_RPM=true INSTALL_K3S_CHANNEL=${var.initial_k3s_channel} INSTALL_K3S_EXEC=agent sh -"], local.apply_k3s_selinux)
 
-  control_plane_nodepools = merge([
+  control_plane_nodes = merge([
     for pool_index, nodepool_obj in var.control_plane_nodepools : {
       for node_index in range(nodepool_obj.count) :
       format("%s-%s-%s", pool_index, node_index, nodepool_obj.name) => {
@@ -186,7 +186,7 @@ locals {
     }
   ]...)
 
-  agent_nodepools = merge([
+  agent_nodes = merge([
     for pool_index, nodepool_obj in var.agent_nodepools : {
       for node_index in range(nodepool_obj.count) :
       format("%s-%s-%s", pool_index, node_index, nodepool_obj.name) => {
diff --git a/main.tf b/main.tf
index 9145a4d..56cf19f 100644
--- a/main.tf
+++ b/main.tf
@@ -16,7 +16,7 @@ resource "hcloud_network" "k3s" {
 # We start from the end of the subnets cird array, 
 # as we would have fewer control plane nodepools, than angent ones.
 resource "hcloud_network_subnet" "control_plane" {
-  count        = length(local.control_plane_nodepools)
+  count        = length(var.control_plane_nodepools)
   network_id   = hcloud_network.k3s.id
   type         = "cloud"
   network_zone = var.network_region
@@ -25,7 +25,7 @@ resource "hcloud_network_subnet" "control_plane" {
 
 # Here we start at the beginning of the subnets cird array
 resource "hcloud_network_subnet" "agent" {
-  count        = length(local.agent_nodepools)
+  count        = length(var.agent_nodepools)
   network_id   = hcloud_network.k3s.id
   type         = "cloud"
   network_zone = var.network_region
diff --git a/terraform.tfvars.example b/terraform.tfvars.example
index 7d01af5..2a77da4 100644
--- a/terraform.tfvars.example
+++ b/terraform.tfvars.example
@@ -27,7 +27,7 @@ network_region   = "eu-central" # change to `us-east` if location is ash
 # Once the cluster is created, you can change nodepool count, and even set it to 0 (in the case of the first control-plane nodepool, the minimum is 1),
 # you can also rename it (if the count is taken to 0), but do not remove a nodepool from the list after the cluster is created. 
 
-# The only nodepools that are safe to remove from the list when you edit it, are the ones at the end of the lists. This is due to how IPs are allocated.
+# The only nodepools that are safe to remove from the list when you edit it, are the ones at the end of the lists. This is due to how subnets and IPs are allocated (FILO).
 # You can however freely add others nodepools the end of each list if you want! The maximum number of nodepools you can create, combined for both lists is 255.
 # Also, before decreasing the count of any nodepools to 0, it's important to drain and cordon it the nodes in question, otherwise it will leave your cluster in a bad state.
 
@@ -161,7 +161,7 @@ load_balancer_location = "fsn1"
 
 # If you want to configure a different CNI for k3s, use this flag
 # possible values: flannel (Default), calico
-# cni_plugin = "flannel"
+# cni_plugin = "calico"
 
 # If you want to disable the k3s default network policy controller, use this flag
 # Calico overrides this value to true automatically