Add include_standard_packages to Definitions.

examples/definitions/.rhai/all_in_one.d.rhai

@@ -677,6 +677,8 @@ op **(u64, int) -> u64;
 
 op **(u8, int) -> u8;
 
+op +(Decimal) -> Decimal;
+
 op +(int) -> int;
 
 op +(f32) -> f32;
@@ -793,6 +795,8 @@ op +=(Instant, float) -> ();
 /// Add the specified number of `seconds` to the timestamp.
 op +=(Instant, int) -> ();
 
+op -(Decimal) -> Decimal;
+
 op -(int) -> int;
 
 op -(f32) -> f32;
@@ -1121,6 +1125,9 @@ op ^(u64, u64) -> u64;
 
 op ^(u8, u8) -> u8;
 
+/// Return the absolute value of the decimal number.
+fn abs(x: Decimal) -> Decimal;
+
 /// Return the absolute value of the number.
 fn abs(x: int) -> int;
 
@@ -1293,6 +1300,13 @@ fn atan(x: float, y: float) -> float;
 /// Return the arc-hyperbolic-tangent of the floating-point number, in radians.
 fn atanh(x: float) -> float;
 
+/// Get an array of object maps containing the function calls stack.
+///
+/// If there is no debugging interface registered, an empty array is returned.
+///
+/// An array of strings is returned under `no_object`.
+fn back_trace() -> Array;
+
 /// Return an iterator over all the bits in the number.
 ///
 /// # Example
@@ -1406,6 +1420,9 @@ fn blob(len: int, value: int) -> Blob;
 /// ```
 fn bytes(string: String) -> int;
 
+/// Return the smallest whole number larger than or equals to the decimal number.
+fn ceiling(x: Decimal) -> Decimal;
+
 /// Return the smallest whole number larger than or equals to the floating-point number.
 fn ceiling(x: float) -> float;
 
@@ -1547,6 +1564,9 @@ fn clear(string: String) -> ();
 /// ```
 fn contains(array: Array, value: ?) -> bool;
 
+/// Return the cosine of the decimal number in radians.
+fn cos(x: Decimal) -> Decimal;
+
 /// Return the cosine of the floating-point number in radians.
 fn cos(x: float) -> float;
 
@@ -1960,6 +1980,9 @@ fn end(range: InclusiveRange) -> int;
 /// ```
 fn ends_with(string: String, match_string: String) -> bool;
 
+/// Return the exponential of the decimal number.
+fn exp(x: Decimal) -> Decimal;
+
 /// Return the exponential of the floating-point number.
 fn exp(x: float) -> float;
 
@@ -2170,9 +2193,15 @@ fn filter(array: Array, filter: FnPtr) -> Array;
 /// ```
 fn filter(array: Array, filter_func: String) -> Array;
 
+/// Return the largest whole number less than or equals to the decimal number.
+fn floor(x: Decimal) -> Decimal;
+
 /// Return the largest whole number less than or equals to the floating-point number.
 fn floor(x: float) -> float;
 
+/// Return the fractional part of the decimal number.
+fn fraction(x: Decimal) -> Decimal;
+
 /// Return the fractional part of the floating-point number.
 fn fraction(x: float) -> float;
 
@@ -2274,6 +2303,9 @@ fn get bits(value: int) -> Iterator<bool>;
 /// ```
 fn get bytes(string: String) -> int;
 
+/// Return the smallest whole number larger than or equals to the decimal number.
+fn get ceiling(x: Decimal) -> Decimal;
+
 /// Return the smallest whole number larger than or equals to the floating-point number.
 fn get ceiling(x: float) -> float;
 
@@ -2307,12 +2339,21 @@ fn get end(range: ExclusiveRange) -> int;
 /// Return the end of the inclusive range.
 fn get end(range: InclusiveRange) -> int;
 
+/// Return the largest whole number less than or equals to the decimal number.
+fn get floor(x: Decimal) -> Decimal;
+
 /// Return the largest whole number less than or equals to the floating-point number.
 fn get floor(x: float) -> float;
 
+/// Return the fractional part of the decimal number.
+fn get fraction(x: Decimal) -> Decimal;
+
 /// Return the fractional part of the floating-point number.
 fn get fraction(x: float) -> float;
 
+/// Return the integral part of the decimal number.
+fn get int(x: Decimal) -> Decimal;
+
 /// Return the integral part of the floating-point number.
 fn get int(x: float) -> float;
 
@@ -2408,6 +2449,9 @@ fn get is_odd(x: u64) -> bool;
 /// Return true if the number is odd.
 fn get is_odd(x: u8) -> bool;
 
+/// Return true if the decimal number is zero.
+fn get is_zero(x: Decimal) -> bool;
+
 /// Return true if the number is zero.
 fn get is_zero(x: int) -> bool;
 
@@ -2484,6 +2528,10 @@ fn get len(string: String) -> int;
 /// ```
 fn get name(fn_ptr: FnPtr) -> String;
 
+/// Return the nearest whole number closest to the decimal number.
+/// Always round mid-point towards the closest even number.
+fn get round(x: Decimal) -> Decimal;
+
 /// Return the nearest whole number closest to the floating-point number.
 /// Rounds away from zero.
 fn get round(x: float) -> float;
@@ -2848,6 +2896,9 @@ fn insert(array: Array, index: int, item: ?) -> ();
 /// ```
 fn insert(blob: Blob, index: int, value: int) -> ();
 
+/// Return the integral part of the decimal number.
+fn int(x: Decimal) -> Decimal;
+
 /// Return the integral part of the floating-point number.
 fn int(x: float) -> float;
 
@@ -2943,6 +2994,9 @@ fn is_odd(x: u64) -> bool;
 /// Return true if the number is odd.
 fn is_odd(x: u8) -> bool;
 
+/// Return true if the decimal number is zero.
+fn is_zero(x: Decimal) -> bool;
+
 /// Return true if the number is zero.
 fn is_zero(x: int) -> bool;
 
@@ -3020,9 +3074,15 @@ fn len(map: Map) -> int;
 /// ```
 fn len(string: String) -> int;
 
+/// Return the natural log of the decimal number.
+fn ln(x: Decimal) -> Decimal;
+
 /// Return the natural log of the floating-point number.
 fn ln(x: float) -> float;
 
+/// Return the log of the decimal number with base 10.
+fn log(x: Decimal) -> Decimal;
+
 /// Return the log of the floating-point number with base 10.
 fn log(x: float) -> float;
 
@@ -3323,6 +3383,17 @@ fn parse_be_int(blob: Blob, range: RangeInclusive<int>) -> int;
 /// ```
 fn parse_be_int(blob: Blob, start: int, len: int) -> int;
 
+/// Parse a string into a decimal number.
+///
+/// # Example
+///
+/// ```rhai
+/// let x = parse_decimal("123.456");
+///
+/// print(x);       // prints 123.456
+/// ```
+fn parse_decimal(string: String) -> Decimal;
+
 /// Parse a string into a floating-point number.
 ///
 /// # Example
@@ -3700,6 +3771,27 @@ fn range(from: u64, to: u64) -> Iterator<u64>;
 /// ```
 fn range(from: u8, to: u8) -> Iterator<u8>;
 
+/// Return an iterator over an exclusive range, each iteration increasing by `step`.
+///
+/// If `range` is reversed and `step` < 0, iteration goes backwards.
+///
+/// Otherwise, if `range` is empty, an empty iterator is returned.
+///
+/// # Example
+///
+/// ```rhai
+/// // prints all values from 8 to 17 in steps of 3
+/// for n in range(8..18, 3) {
+///     print(n);
+/// }
+///
+/// // prints all values down from 18 to 9 in steps of -3
+/// for n in range(18..8, -3) {
+///     print(n);
+/// }
+/// ```
+fn range(range: Range<Decimal>, step: Decimal) -> Iterator<Decimal>;
+
 /// Return an iterator over an exclusive range, each iteration increasing by `step`.
 ///
 /// If `range` is reversed and `step` < 0, iteration goes backwards.
@@ -3931,6 +4023,28 @@ fn range(range: Range<u64>, step: u64) -> Iterator<u64>;
 /// ```
 fn range(range: Range<u8>, step: u8) -> Iterator<u8>;
 
+/// Return an iterator over the exclusive range of `from..to`, each iteration increasing by `step`.
+/// The value `to` is never included.
+///
+/// If `from` > `to` and `step` < 0, iteration goes backwards.
+///
+/// If `from` > `to` and `step` > 0 or `from` < `to` and `step` < 0, an empty iterator is returned.
+///
+/// # Example
+///
+/// ```rhai
+/// // prints all values from 8 to 17 in steps of 3
+/// for n in range(8, 18, 3) {
+///     print(n);
+/// }
+///
+/// // prints all values down from 18 to 9 in steps of -3
+/// for n in range(18, 8, -3) {
+///     print(n);
+/// }
+/// ```
+fn range(from: Decimal, to: Decimal, step: Decimal) -> Iterator<Decimal>;
+
 /// Return an iterator over the exclusive range of `from..to`, each iteration increasing by `step`.
 /// The value `to` is never included.
 ///
@@ -4764,10 +4878,34 @@ fn reverse(array: Array) -> ();
 /// ```
 fn reverse(blob: Blob) -> ();
 
+/// Return the nearest whole number closest to the decimal number.
+/// Always round mid-point towards the closest even number.
+fn round(x: Decimal) -> Decimal;
+
 /// Return the nearest whole number closest to the floating-point number.
 /// Rounds away from zero.
 fn round(x: float) -> float;
 
+/// Round the decimal number to the specified number of `digits` after the decimal point and return it.
+/// Always round mid-point towards the closest even number.
+fn round(x: Decimal, digits: int) -> Decimal;
+
+/// Round the decimal number to the specified number of `digits` after the decimal point and return it.
+/// Always round towards zero.
+fn round_down(x: Decimal, digits: int) -> Decimal;
+
+/// Round the decimal number to the specified number of `digits` after the decimal point and return it.
+/// Always round mid-points towards zero.
+fn round_half_down(x: Decimal, digits: int) -> Decimal;
+
+/// Round the decimal number to the specified number of `digits` after the decimal point and return it.
+/// Always round mid-points away from zero.
+fn round_half_up(x: Decimal, digits: int) -> Decimal;
+
+/// Round the decimal number to the specified number of `digits` after the decimal point and return it.
+/// Always round away from zero.
+fn round_up(x: Decimal, digits: int) -> Decimal;
+
 /// Set the element at the `index` position in the array to a new `value`.
 ///
 /// * If `index` < 0, position counts from the end of the array (`-1` is the last element).
@@ -4993,6 +5131,13 @@ fn shift(array: Array) -> ?;
 /// ```
 fn shift(blob: Blob) -> int;
 
+/// Return the sign (as an integer) of the decimal number according to the following:
+///
+/// * `0` if the number is zero
+/// * `1` if the number is positive
+/// * `-1` if the number is negative
+fn sign(x: Decimal) -> int;
+
 /// Return the sign (as an integer) of the number according to the following:
 ///
 /// * `0` if the number is zero
@@ -5042,6 +5187,9 @@ fn sign(x: i32) -> int;
 /// * `-1` if the number is negative
 fn sign(x: i8) -> int;
 
+/// Return the sine of the decimal number in radians.
+fn sin(x: Decimal) -> Decimal;
+
 /// Return the sine of the floating-point number in radians.
 fn sin(x: float) -> float;
 
@@ -5471,6 +5619,9 @@ fn split_rev(string: String, delimiter: String, segments: int) -> Array;
 /// ```
 fn split_rev(string: String, delimiter: char, segments: int) -> Array;
 
+/// Return the square root of the decimal number.
+fn sqrt(x: Decimal) -> Decimal;
+
 /// Return the square root of the floating-point number.
 fn sqrt(x: float) -> float;
 
@@ -5565,6 +5716,9 @@ fn sub_string(string: String, start: int, len: int) -> String;
 /// ```
 fn tag(value: ?) -> int;
 
+/// Return the tangent of the decimal number in radians.
+fn tan(x: Decimal) -> Decimal;
+
 /// Return the tangent of the floating-point number in radians.
 fn tan(x: float) -> float;
 
@@ -5671,9 +5825,34 @@ fn to_debug(unit: ()) -> String;
 /// Convert the boolean value into a string in debug format.
 fn to_debug(value: bool) -> String;
 
+/// Convert the floating-point number to decimal.
+fn to_decimal(x: f32) -> Decimal;
+
+/// Convert the floating-point number to decimal.
+fn to_decimal(x: float) -> Decimal;
+
+fn to_decimal(x: i16) -> Decimal;
+
+fn to_decimal(x: i32) -> Decimal;
+
+fn to_decimal(x: int) -> Decimal;
+
+fn to_decimal(x: i8) -> Decimal;
+
+fn to_decimal(x: u16) -> Decimal;
+
+fn to_decimal(x: u32) -> Decimal;
+
+fn to_decimal(x: u64) -> Decimal;
+
+fn to_decimal(x: u8) -> Decimal;
+
 /// Convert radians to degrees.
 fn to_degrees(x: float) -> float;
 
+/// Convert the decimal number to floating-point.
+fn to_float(x: Decimal) -> float;
+
 /// Convert the 32-bit floating-point number to 64-bit.
 fn to_float(x: f32) -> float;
 
@@ -5725,6 +5904,9 @@ fn to_hex(value: u64) -> String;
 /// Convert the `value` into a string in hex format.
 fn to_hex(value: u8) -> String;
 
+/// Convert the decimal number into an integer.
+fn to_int(x: Decimal) -> int;
+
 fn to_int(x: char) -> int;
 
 /// Convert the floating-point number into an integer.
@@ -6247,10 +6429,10 @@ op |(u32, u32) -> u32;
 op |(u64, u64) -> u64;
 
 op |(u8, u8) -> u8;
-module general_kenobi {
 
+module general_kenobi {
 /// Returns a string where "hello there" is repeated `n` times.
 fn hello_there(n: int) -> String;
 }
 
-let hello_there;
+let hello_there;

examples/definitions/.rhai/all_in_one_without_standard.d.rhai

@@ -0,0 +1,10 @@
+module static;
+
+op minus(int, int) -> int;
+
+module general_kenobi {
+/// Returns a string where "hello there" is repeated `n` times.
+fn hello_there(n: int) -> String;
+}
+
+let hello_there;

examples/definitions/.rhai/definitions/__static__.d.rhai

@@ -159,6 +159,8 @@ op **(u64, int) -> u64;
 
 op **(u8, int) -> u8;
 
+op +(Decimal) -> Decimal;
+
 op +(int) -> int;
 
 op +(f32) -> f32;
@@ -275,6 +277,8 @@ op +=(Instant, float) -> ();
 /// Add the specified number of `seconds` to the timestamp.
 op +=(Instant, int) -> ();
 
+op -(Decimal) -> Decimal;
+
 op -(int) -> int;
 
 op -(f32) -> f32;
@@ -603,6 +607,9 @@ op ^(u64, u64) -> u64;
 
 op ^(u8, u8) -> u8;
 
+/// Return the absolute value of the decimal number.
+fn abs(x: Decimal) -> Decimal;
+
 /// Return the absolute value of the number.
 fn abs(x: int) -> int;
 
@@ -775,6 +782,13 @@ fn atan(x: float, y: float) -> float;
 /// Return the arc-hyperbolic-tangent of the floating-point number, in radians.
 fn atanh(x: float) -> float;
 
+/// Get an array of object maps containing the function calls stack.
+///
+/// If there is no debugging interface registered, an empty array is returned.
+///
+/// An array of strings is returned under `no_object`.
+fn back_trace() -> Array;
+
 /// Return an iterator over all the bits in the number.
 ///
 /// # Example
@@ -888,6 +902,9 @@ fn blob(len: int, value: int) -> Blob;
 /// ```
 fn bytes(string: String) -> int;
 
+/// Return the smallest whole number larger than or equals to the decimal number.
+fn ceiling(x: Decimal) -> Decimal;
+
 /// Return the smallest whole number larger than or equals to the floating-point number.
 fn ceiling(x: float) -> float;
 
@@ -1029,6 +1046,9 @@ fn clear(string: String) -> ();
 /// ```
 fn contains(array: Array, value: ?) -> bool;
 
+/// Return the cosine of the decimal number in radians.
+fn cos(x: Decimal) -> Decimal;
+
 /// Return the cosine of the floating-point number in radians.
 fn cos(x: float) -> float;
 
@@ -1442,6 +1462,9 @@ fn end(range: InclusiveRange) -> int;
 /// ```
 fn ends_with(string: String, match_string: String) -> bool;
 
+/// Return the exponential of the decimal number.
+fn exp(x: Decimal) -> Decimal;
+
 /// Return the exponential of the floating-point number.
 fn exp(x: float) -> float;
 
@@ -1652,9 +1675,15 @@ fn filter(array: Array, filter: FnPtr) -> Array;
 /// ```
 fn filter(array: Array, filter_func: String) -> Array;
 
+/// Return the largest whole number less than or equals to the decimal number.
+fn floor(x: Decimal) -> Decimal;
+
 /// Return the largest whole number less than or equals to the floating-point number.
 fn floor(x: float) -> float;
 
+/// Return the fractional part of the decimal number.
+fn fraction(x: Decimal) -> Decimal;
+
 /// Return the fractional part of the floating-point number.
 fn fraction(x: float) -> float;
 
@@ -1756,6 +1785,9 @@ fn get bits(value: int) -> Iterator<bool>;
 /// ```
 fn get bytes(string: String) -> int;
 
+/// Return the smallest whole number larger than or equals to the decimal number.
+fn get ceiling(x: Decimal) -> Decimal;
+
 /// Return the smallest whole number larger than or equals to the floating-point number.
 fn get ceiling(x: float) -> float;
 
@@ -1789,12 +1821,21 @@ fn get end(range: ExclusiveRange) -> int;
 /// Return the end of the inclusive range.
 fn get end(range: InclusiveRange) -> int;
 
+/// Return the largest whole number less than or equals to the decimal number.
+fn get floor(x: Decimal) -> Decimal;
+
 /// Return the largest whole number less than or equals to the floating-point number.
 fn get floor(x: float) -> float;
 
+/// Return the fractional part of the decimal number.
+fn get fraction(x: Decimal) -> Decimal;
+
 /// Return the fractional part of the floating-point number.
 fn get fraction(x: float) -> float;
 
+/// Return the integral part of the decimal number.
+fn get int(x: Decimal) -> Decimal;
+
 /// Return the integral part of the floating-point number.
 fn get int(x: float) -> float;
 
@@ -1890,6 +1931,9 @@ fn get is_odd(x: u64) -> bool;
 /// Return true if the number is odd.
 fn get is_odd(x: u8) -> bool;
 
+/// Return true if the decimal number is zero.
+fn get is_zero(x: Decimal) -> bool;
+
 /// Return true if the number is zero.
 fn get is_zero(x: int) -> bool;
 
@@ -1966,6 +2010,10 @@ fn get len(string: String) -> int;
 /// ```
 fn get name(fn_ptr: FnPtr) -> String;
 
+/// Return the nearest whole number closest to the decimal number.
+/// Always round mid-point towards the closest even number.
+fn get round(x: Decimal) -> Decimal;
+
 /// Return the nearest whole number closest to the floating-point number.
 /// Rounds away from zero.
 fn get round(x: float) -> float;
@@ -2330,6 +2378,9 @@ fn insert(array: Array, index: int, item: ?) -> ();
 /// ```
 fn insert(blob: Blob, index: int, value: int) -> ();
 
+/// Return the integral part of the decimal number.
+fn int(x: Decimal) -> Decimal;
+
 /// Return the integral part of the floating-point number.
 fn int(x: float) -> float;
 
@@ -2425,6 +2476,9 @@ fn is_odd(x: u64) -> bool;
 /// Return true if the number is odd.
 fn is_odd(x: u8) -> bool;
 
+/// Return true if the decimal number is zero.
+fn is_zero(x: Decimal) -> bool;
+
 /// Return true if the number is zero.
 fn is_zero(x: int) -> bool;
 
@@ -2502,9 +2556,15 @@ fn len(map: Map) -> int;
 /// ```
 fn len(string: String) -> int;
 
+/// Return the natural log of the decimal number.
+fn ln(x: Decimal) -> Decimal;
+
 /// Return the natural log of the floating-point number.
 fn ln(x: float) -> float;
 
+/// Return the log of the decimal number with base 10.
+fn log(x: Decimal) -> Decimal;
+
 /// Return the log of the floating-point number with base 10.
 fn log(x: float) -> float;
 
@@ -2805,6 +2865,17 @@ fn parse_be_int(blob: Blob, range: RangeInclusive<int>) -> int;
 /// ```
 fn parse_be_int(blob: Blob, start: int, len: int) -> int;
 
+/// Parse a string into a decimal number.
+///
+/// # Example
+///
+/// ```rhai
+/// let x = parse_decimal("123.456");
+///
+/// print(x);       // prints 123.456
+/// ```
+fn parse_decimal(string: String) -> Decimal;
+
 /// Parse a string into a floating-point number.
 ///
 /// # Example
@@ -3182,6 +3253,27 @@ fn range(from: u64, to: u64) -> Iterator<u64>;
 /// ```
 fn range(from: u8, to: u8) -> Iterator<u8>;
 
+/// Return an iterator over an exclusive range, each iteration increasing by `step`.
+///
+/// If `range` is reversed and `step` < 0, iteration goes backwards.
+///
+/// Otherwise, if `range` is empty, an empty iterator is returned.
+///
+/// # Example
+///
+/// ```rhai
+/// // prints all values from 8 to 17 in steps of 3
+/// for n in range(8..18, 3) {
+///     print(n);
+/// }
+///
+/// // prints all values down from 18 to 9 in steps of -3
+/// for n in range(18..8, -3) {
+///     print(n);
+/// }
+/// ```
+fn range(range: Range<Decimal>, step: Decimal) -> Iterator<Decimal>;
+
 /// Return an iterator over an exclusive range, each iteration increasing by `step`.
 ///
 /// If `range` is reversed and `step` < 0, iteration goes backwards.
@@ -3413,6 +3505,28 @@ fn range(range: Range<u64>, step: u64) -> Iterator<u64>;
 /// ```
 fn range(range: Range<u8>, step: u8) -> Iterator<u8>;
 
+/// Return an iterator over the exclusive range of `from..to`, each iteration increasing by `step`.
+/// The value `to` is never included.
+///
+/// If `from` > `to` and `step` < 0, iteration goes backwards.
+///
+/// If `from` > `to` and `step` > 0 or `from` < `to` and `step` < 0, an empty iterator is returned.
+///
+/// # Example
+///
+/// ```rhai
+/// // prints all values from 8 to 17 in steps of 3
+/// for n in range(8, 18, 3) {
+///     print(n);
+/// }
+///
+/// // prints all values down from 18 to 9 in steps of -3
+/// for n in range(18, 8, -3) {
+///     print(n);
+/// }
+/// ```
+fn range(from: Decimal, to: Decimal, step: Decimal) -> Iterator<Decimal>;
+
 /// Return an iterator over the exclusive range of `from..to`, each iteration increasing by `step`.
 /// The value `to` is never included.
 ///
@@ -4246,10 +4360,34 @@ fn reverse(array: Array) -> ();
 /// ```
 fn reverse(blob: Blob) -> ();
 
+/// Return the nearest whole number closest to the decimal number.
+/// Always round mid-point towards the closest even number.
+fn round(x: Decimal) -> Decimal;
+
 /// Return the nearest whole number closest to the floating-point number.
 /// Rounds away from zero.
 fn round(x: float) -> float;
 
+/// Round the decimal number to the specified number of `digits` after the decimal point and return it.
+/// Always round mid-point towards the closest even number.
+fn round(x: Decimal, digits: int) -> Decimal;
+
+/// Round the decimal number to the specified number of `digits` after the decimal point and return it.
+/// Always round towards zero.
+fn round_down(x: Decimal, digits: int) -> Decimal;
+
+/// Round the decimal number to the specified number of `digits` after the decimal point and return it.
+/// Always round mid-points towards zero.
+fn round_half_down(x: Decimal, digits: int) -> Decimal;
+
+/// Round the decimal number to the specified number of `digits` after the decimal point and return it.
+/// Always round mid-points away from zero.
+fn round_half_up(x: Decimal, digits: int) -> Decimal;
+
+/// Round the decimal number to the specified number of `digits` after the decimal point and return it.
+/// Always round away from zero.
+fn round_up(x: Decimal, digits: int) -> Decimal;
+
 /// Set the element at the `index` position in the array to a new `value`.
 ///
 /// * If `index` < 0, position counts from the end of the array (`-1` is the last element).
@@ -4475,6 +4613,13 @@ fn shift(array: Array) -> ?;
 /// ```
 fn shift(blob: Blob) -> int;
 
+/// Return the sign (as an integer) of the decimal number according to the following:
+///
+/// * `0` if the number is zero
+/// * `1` if the number is positive
+/// * `-1` if the number is negative
+fn sign(x: Decimal) -> int;
+
 /// Return the sign (as an integer) of the number according to the following:
 ///
 /// * `0` if the number is zero
@@ -4524,6 +4669,9 @@ fn sign(x: i32) -> int;
 /// * `-1` if the number is negative
 fn sign(x: i8) -> int;
 
+/// Return the sine of the decimal number in radians.
+fn sin(x: Decimal) -> Decimal;
+
 /// Return the sine of the floating-point number in radians.
 fn sin(x: float) -> float;
 
@@ -4953,6 +5101,9 @@ fn split_rev(string: String, delimiter: String, segments: int) -> Array;
 /// ```
 fn split_rev(string: String, delimiter: char, segments: int) -> Array;
 
+/// Return the square root of the decimal number.
+fn sqrt(x: Decimal) -> Decimal;
+
 /// Return the square root of the floating-point number.
 fn sqrt(x: float) -> float;
 
@@ -5047,6 +5198,9 @@ fn sub_string(string: String, start: int, len: int) -> String;
 /// ```
 fn tag(value: ?) -> int;
 
+/// Return the tangent of the decimal number in radians.
+fn tan(x: Decimal) -> Decimal;
+
 /// Return the tangent of the floating-point number in radians.
 fn tan(x: float) -> float;
 
@@ -5153,9 +5307,34 @@ fn to_debug(unit: ()) -> String;
 /// Convert the boolean value into a string in debug format.
 fn to_debug(value: bool) -> String;
 
+/// Convert the floating-point number to decimal.
+fn to_decimal(x: f32) -> Decimal;
+
+/// Convert the floating-point number to decimal.
+fn to_decimal(x: float) -> Decimal;
+
+fn to_decimal(x: i16) -> Decimal;
+
+fn to_decimal(x: i32) -> Decimal;
+
+fn to_decimal(x: int) -> Decimal;
+
+fn to_decimal(x: i8) -> Decimal;
+
+fn to_decimal(x: u16) -> Decimal;
+
+fn to_decimal(x: u32) -> Decimal;
+
+fn to_decimal(x: u64) -> Decimal;
+
+fn to_decimal(x: u8) -> Decimal;
+
 /// Convert radians to degrees.
 fn to_degrees(x: float) -> float;
 
+/// Convert the decimal number to floating-point.
+fn to_float(x: Decimal) -> float;
+
 /// Convert the 32-bit floating-point number to 64-bit.
 fn to_float(x: f32) -> float;
 
@@ -5207,6 +5386,9 @@ fn to_hex(value: u64) -> String;
 /// Convert the `value` into a string in hex format.
 fn to_hex(value: u8) -> String;
 
+/// Convert the decimal number into an integer.
+fn to_int(x: Decimal) -> int;
+
 fn to_int(x: char) -> int;
 
 /// Convert the floating-point number into an integer.

examples/definitions/.rhai/defs.json

@@ -0,0 +1,49 @@
+{
+  "modules": {
+    "general_kenobi": {
+      "functions": [
+        {
+          "baseHash": 2647973605745432570,
+          "fullHash": 14052888716942083368,
+          "namespace": "internal",
+          "access": "public",
+          "name": "hello_there",
+          "type": "native",
+          "numParams": 1,
+          "params": [
+            {
+              "name": "n",
+              "type": "i64"
+            }
+          ],
+          "returnType": "String",
+          "signature": "hello_there(n: i64) -> String",
+          "docComments": [
+            "/// Returns a string where \"hello there\" is repeated `n` times."
+          ]
+        }
+      ]
+    }
+  },
+  "functions": [
+    {
+      "baseHash": 6399059862174416123,
+      "fullHash": 15886705420394126404,
+      "namespace": "global",
+      "access": "public",
+      "name": "minus",
+      "type": "native",
+      "numParams": 2,
+      "params": [
+        {
+          "type": "i64"
+        },
+        {
+          "type": "i64"
+        }
+      ],
+      "returnType": "i64",
+      "signature": "minus(_: i64, _: i64) -> i64"
+    }
+  ]
+}

examples/definitions/main.rs

@@ -44,5 +44,21 @@ fn main() -> Result<(), Box<EvalAltResult>> {
         .write_to_file("examples/definitions/.rhai/all_in_one.d.rhai")
         .unwrap();
 
+    // Skip standard packages if not needed (e.g. they are provided elsewhere).
+    engine
+        .definitions_with_scope(&scope)
+        .include_standard_packages(false)
+        .write_to_file("examples/definitions/.rhai/all_in_one_without_standard.d.rhai")
+        .unwrap();
+
+    // Write function definitions as JSON.
+    let json = engine
+        .definitions()
+        .include_standard_packages(false)
+        .json()
+        .unwrap();
+
+    std::fs::write("examples/definitions/.rhai/defs.json", json).unwrap();
+
     Ok(())
 }

src/api/definitions/mod.rs

@@ -1,5 +1,4 @@
 //! Module that defines functions to output definition files for [`Engine`].
-//! Exported under the `internals` and `metadata` feature only.
 #![cfg(feature = "internals")]
 #![cfg(feature = "metadata")]
 
@@ -66,6 +65,27 @@ impl Engine {
     }
 }
 
+/// Internal configuration for module generation.
+#[derive(Debug, Clone, Copy, Eq, PartialEq, Hash)]
+#[non_exhaustive]
+#[must_use]
+pub struct DefinitionsConfig {
+    /// Write `module ...` headers in definition files (default `false`).
+    pub write_headers: bool,
+    /// Include standard packages (default `true`).
+    pub include_standard_packages: bool,
+}
+
+impl Default for DefinitionsConfig {
+    #[inline(always)]
+    fn default() -> Self {
+        Self {
+            write_headers: false,
+            include_standard_packages: true,
+        }
+    }
+}
+
 /// _(metadata, internals)_ Definitions helper type to generate definition files based on the
 /// contents of an [`Engine`].
 /// Exported under the `internals` and `metadata` feature only.
@@ -79,7 +99,7 @@ pub struct Definitions<'e> {
     config: DefinitionsConfig,
 }
 
-impl<'e> Definitions<'e> {
+impl Definitions<'_> {
     /// Write `module ...` headers in separate definitions, default `false`.
     ///
     /// Headers are always present in content that is expected to be written to a file
@@ -89,9 +109,32 @@ impl<'e> Definitions<'e> {
         self.config.write_headers = headers;
         self
     }
+    /// Include standard packages when writing definition files.
+    #[inline(always)]
+    pub fn include_standard_packages(mut self, include_standard_packages: bool) -> Self {
+        self.config.include_standard_packages = include_standard_packages;
+        self
+    }
+    /// Get the [`Engine`].
+    #[inline(always)]
+    pub fn engine(&self) -> &Engine {
+        self.engine
+    }
+    /// Get the [`Scope`].
+    #[inline(always)]
+    #[must_use]
+    pub fn scope(&self) -> Option<&Scope> {
+        self.scope
+    }
+    /// Get the configuration.
+    #[inline(always)]
+    #[must_use]
+    pub(crate) fn config(&self) -> &DefinitionsConfig {
+        &self.config
+    }
 }
 
-impl<'e> Definitions<'e> {
+impl Definitions<'_> {
     /// Output all definition files returned from [`iter_files`][Definitions::iter_files] to a
     /// specified directory.
     ///
@@ -132,10 +175,12 @@ impl<'e> Definitions<'e> {
 
         let mut def_file = String::from("module static;\n\n");
 
-        def_file += &self.builtin_functions_operators_impl(&config);
-        def_file += "\n";
-        def_file += &self.builtin_functions_impl(&config);
-        def_file += "\n";
+        if config.include_standard_packages {
+            def_file += &self.builtin_functions_operators_impl(&config);
+            def_file += "\n";
+            def_file += &self.builtin_functions_impl(&config);
+            def_file += "\n";
+        }
         def_file += &self.static_module_impl(&config);
         def_file += "\n";
 
@@ -144,14 +189,16 @@ impl<'e> Definitions<'e> {
             for (module_name, module_def) in self.modules_impl(&config) {
                 write!(
                     &mut def_file,
-                    "module {module_name} {{\n\n{module_def}\n}}\n"
+                    "\nmodule {module_name} {{\n{module_def}\n}}\n"
                 )
                 .unwrap();
             }
             def_file += "\n";
         }
 
-        def_file += &self.scope_impl(&config);
+        def_file += &self.scope_items_impl(&config);
+
+        def_file += "\n";
 
         def_file
     }
@@ -166,25 +213,31 @@ impl<'e> Definitions<'e> {
             ..self.config
         };
 
-        IntoIterator::into_iter([
+        if config.include_standard_packages {
+            vec![
+                (
+                    "__builtin__.d.rhai".to_string(),
+                    self.builtin_functions_impl(&config),
+                ),
+                (
+                    "__builtin-operators__.d.rhai".to_string(),
+                    self.builtin_functions_operators_impl(&config),
+                ),
+            ]
+        } else {
+            vec![]
+        }
+        .into_iter()
+        .chain(std::iter::once((
+            "__static__.d.rhai".to_string(),
+            self.static_module_impl(&config),
+        )))
+        .chain(self.scope.iter().map(move |_| {
             (
-                "__builtin__.d.rhai".to_string(),
-                self.builtin_functions_impl(&config),
-            ),
-            (
-                "__builtin-operators__.d.rhai".to_string(),
-                self.builtin_functions_operators_impl(&config),
-            ),
-            (
-                "__static__.d.rhai".to_string(),
-                self.static_module_impl(&config),
-            ),
-        ])
-        .chain(
-            self.scope
-                .iter()
-                .map(move |_| ("__scope__.d.rhai".to_string(), self.scope_impl(&config))),
-        )
+                "__scope__.d.rhai".to_string(),
+                self.scope_items_impl(&config),
+            )
+        }))
         .chain(
             #[cfg(not(feature = "no_module"))]
             {
@@ -252,14 +305,17 @@ impl<'e> Definitions<'e> {
             String::new()
         };
 
-        let mut first = true;
-        for m in &self.engine.global_modules {
-            if !first {
-                s += "\n\n";
-            }
-            first = false;
-            m.write_definition(&mut s, self).unwrap();
-        }
+        self.engine
+            .global_modules
+            .iter()
+            .filter(|m| self.config.include_standard_packages || !m.standard)
+            .enumerate()
+            .for_each(|(i, m)| {
+                if i > 0 {
+                    s += "\n\n";
+                }
+                m.write_definition(&mut s, self).unwrap();
+            });
 
         s
     }
@@ -267,13 +323,13 @@ impl<'e> Definitions<'e> {
     /// Return definitions for all items inside the [`Scope`], if any.
     #[inline(always)]
     #[must_use]
-    pub fn scope(&self) -> String {
-        self.scope_impl(&self.config)
+    pub fn scope_items(&self) -> String {
+        self.scope_items_impl(&self.config)
     }
 
     /// Return definitions for all items inside the [`Scope`], if any.
     #[must_use]
-    fn scope_impl(&self, config: &DefinitionsConfig) -> String {
+    fn scope_items_impl(&self, config: &DefinitionsConfig) -> String {
         let mut s = if config.write_headers {
             String::from("module static;\n\n")
         } else {
@@ -324,14 +380,6 @@ impl<'e> Definitions<'e> {
     }
 }
 
-/// Internal configuration for module generation.
-#[derive(Debug, Default, Clone, Copy)]
-#[non_exhaustive]
-struct DefinitionsConfig {
-    /// Whether to write `module ...` headers.
-    write_headers: bool,
-}
-
 impl Module {
     /// Return definitions for all items inside the [`Module`].
     fn definition(&self, def: &Definitions) -> String {

src/packages/iter_basic.rs

@@ -11,6 +11,12 @@ use std::{
     ops::{Range, RangeInclusive},
 };
 
+#[cfg(not(feature = "no_float"))]
+use crate::FLOAT;
+
+#[cfg(feature = "decimal")]
+use rust_decimal::Decimal;
+
 #[cfg(not(feature = "unchecked"))]
 #[inline(always)]
 fn std_add<T>(x: T, y: T) -> Option<T>
@@ -348,10 +354,10 @@ def_package! {
         }
 
         #[cfg(not(feature = "no_float"))]
-        reg_range!(lib | step(regular_add) "range" => crate::FLOAT);
+        reg_range!(lib | step(regular_add) "range" => FLOAT);
 
         #[cfg(feature = "decimal")]
-        reg_range!(lib | step "range" => rust_decimal::Decimal);
+        reg_range!(lib | step "range" => Decimal);
 
         // Register string iterator
         lib.set_iterator::<CharsStream>();

src/serde/metadata.rs

@@ -1,5 +1,4 @@
 //! Serialization of functions metadata.
-
 #![cfg(feature = "metadata")]
 
 use crate::module::{calc_native_fn_hash, FuncInfo};
@@ -195,6 +194,74 @@ impl<'a> From<&'a crate::Module> for ModuleMetadata<'a> {
     }
 }
 
+/// Generate a list of all functions in JSON format.
+pub fn gen_metadata_to_json(
+    engine: &Engine,
+    ast: Option<&AST>,
+    include_standard_packages: bool,
+) -> serde_json::Result<String> {
+    let _ast = ast;
+    let mut global = ModuleMetadata::new();
+
+    #[cfg(not(feature = "no_module"))]
+    for (name, m) in &engine.global_sub_modules {
+        global.modules.insert(name, m.as_ref().into());
+    }
+
+    engine
+        .global_modules
+        .iter()
+        .filter(|m| include_standard_packages || !m.standard)
+        .flat_map(|m| m.iter_fn())
+        .for_each(|f| {
+            #[allow(unused_mut)]
+            let mut meta: FnMetadata = f.into();
+            #[cfg(not(feature = "no_module"))]
+            {
+                meta.namespace = FnNamespace::Global;
+            }
+            global.functions.push(meta);
+        });
+
+    #[cfg(not(feature = "no_function"))]
+    if let Some(ast) = _ast {
+        for f in ast.shared_lib().iter_fn() {
+            #[allow(unused_mut)]
+            let mut meta: FnMetadata = f.into();
+            #[cfg(not(feature = "no_module"))]
+            {
+                meta.namespace = FnNamespace::Global;
+            }
+            global.functions.push(meta);
+        }
+    }
+
+    global.functions.sort();
+
+    #[cfg(feature = "metadata")]
+    if let Some(ast) = _ast {
+        global.doc = ast.doc().into();
+    }
+
+    serde_json::to_string_pretty(&global)
+}
+
+#[cfg(feature = "internals")]
+impl crate::api::definitions::Definitions<'_> {
+    /// Generate a list of all functions in JSON format.
+    ///
+    /// Functions from the following sources are included:
+    /// 1) Functions defined in an [`AST`][crate::AST]
+    /// 2) Functions registered into the global namespace
+    /// 3) Functions in static modules
+    /// 4) Functions in registered global packages
+    /// 5) Functions in standard packages (optional)
+    #[inline(always)]
+    pub fn json(&self) -> serde_json::Result<String> {
+        gen_metadata_to_json(self.engine(), None, self.config().include_standard_packages)
+    }
+}
+
 impl Engine {
     /// _(metadata)_ Generate a list of all functions (including those defined in an
     /// [`AST`][crate::AST]) in JSON format.
@@ -206,52 +273,13 @@ impl Engine {
     /// 3) Functions in static modules
     /// 4) Functions in registered global packages
     /// 5) Functions in standard packages (optional)
+    #[inline(always)]
     pub fn gen_fn_metadata_with_ast_to_json(
         &self,
         ast: &AST,
-        include_packages: bool,
+        include_standard_packages: bool,
     ) -> serde_json::Result<String> {
-        let _ast = ast;
-        let mut global = ModuleMetadata::new();
-
-        #[cfg(not(feature = "no_module"))]
-        for (name, m) in &self.global_sub_modules {
-            global.modules.insert(name, m.as_ref().into());
-        }
-
-        self.global_modules
-            .iter()
-            .filter(|m| include_packages || !m.standard)
-            .flat_map(|m| m.iter_fn())
-            .for_each(|f| {
-                #[allow(unused_mut)]
-                let mut meta: FnMetadata = f.into();
-                #[cfg(not(feature = "no_module"))]
-                {
-                    meta.namespace = FnNamespace::Global;
-                }
-                global.functions.push(meta);
-            });
-
-        #[cfg(not(feature = "no_function"))]
-        for f in _ast.shared_lib().iter_fn() {
-            #[allow(unused_mut)]
-            let mut meta: FnMetadata = f.into();
-            #[cfg(not(feature = "no_module"))]
-            {
-                meta.namespace = FnNamespace::Global;
-            }
-            global.functions.push(meta);
-        }
-
-        global.functions.sort();
-
-        #[cfg(feature = "metadata")]
-        {
-            global.doc = ast.doc().into();
-        }
-
-        serde_json::to_string_pretty(&global)
+        gen_metadata_to_json(self, Some(ast), include_standard_packages)
     }
 
     /// Generate a list of all functions in JSON format.
@@ -260,9 +288,13 @@ impl Engine {
     /// Functions from the following sources are included:
     /// 1) Functions registered into the global namespace
     /// 2) Functions in static modules
-    /// 3) Functions in global modules (optional)
+    /// 3) Functions in registered global packages
+    /// 4) Functions in standard packages (optional)
     #[inline(always)]
-    pub fn gen_fn_metadata_to_json(&self, include_packages: bool) -> serde_json::Result<String> {
-        self.gen_fn_metadata_with_ast_to_json(&AST::empty(), include_packages)
+    pub fn gen_fn_metadata_to_json(
+        &self,
+        include_standard_packages: bool,
+    ) -> serde_json::Result<String> {
+        gen_metadata_to_json(self, None, include_standard_packages)
     }
 }